研究成果

研究論文

2022

ナノシリカ粒子の添加による付加製造用金属粉末の流動性改善と造形特性, 坪内 光太郎，古本 達明,  山口貢, 精密工学会誌，88，5，pp.415-419(2022)

Influence of metal transfer behavior under Ar and CO2 shielding gases on geometry and surface roughness of single and multi-layer structures in GMAW-based wire arc additive manufacturing of mild steel, Yamaguchi, M., Komata, R., Furumoto, T.,  Abe, S., Hosokawa, A, The International Journal of Advanced Manufacturing Technology, Vol.119, pp.911–926 (2022)

Improving finishing efficiency using a cover plate in gyro finishing, Hashimoto, Y., Nakayama, Y., Furumoto, T., Hosokawa, A., Precision Engineering, Vol.74, pp.140-146(2022)

Evaluation of spatter particles, metal vapour jets, and depressions considering influence of laser incident angle on melt pool behavior, Tsubouchi, K., Furumoto, T., Yamaguchi, M., Ezura, A., Yamada, S., Osaki, M., Sugiyama, K., The International Journal of Advanced Manufacturing Technology(2022)

Evaluating the thermal characteristics of laser powder bed fusion, Furumoto, T., Oishi, K., Abe, S., Tsubouchi, K., Yamaguchi, M., Adam T.Clare., Journal of Materials Processing Technology, Vol.299(2022)

A calculation method for workpiece profile variation during double-sided lapping by considering workpiece elastic deformation, Hashimoto, Y., Ozaki, R., Furumoto, T., Hosokawa, A., Precision Engineering, Vol.73, pp.457-469(2022)

2021

Study on the relationship between material removal rate and tool flank temperature in orthogonal turn-milling, Shimanuki, K., Hosokawa, A., Koyano, T., Furumoto, T., Hashimoto, Y., Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol.15, 4pages(2021)

Improving surface quality using laser scanning and machining strategy combining powder bed fusion and machining processes, Furumoto, T., Abe, S., Yamaguchi, M., Hosokawa, A., The International Journal of Advanced Manufacturing Technology, Vol.117, pp.3405–3413 (2021)

Fabrication of Release Agent Supply Die with Porous Structure Using Metal-Based Additive Manufacturing, Chiba, H., Furumoto, T., Hori, Y., Nikawa, M., Hayashi, N., Yamaguchi, M., International Journal of Automation Technology, Vol.15, No.6(2021)

A novel measurement method for the torque acting on the upper platen in a three-way double-sided lapping/polishing machine, Hashimoto, Y., Ozaki, R., Furumoto, T., Hosokawa, A., Precision Engineering, Vol.72, pp.891-898(2021)

Thermal stress cleavage of a single-crystal round sapphire bar by carbon dioxide laser, Furumoto, T., Saito, R., Ochi, Y., Hashimoto, Y.,  Yamaguchi, M., Koyano, T., Hosokawa, A., Journal of Materials Processing Technology,  Vol. 297, No. 117237,  (2021)

Effects of the powder morphology, size distribution, and characteristics on the wettability of selective laser melted H13 steel, Yamaguchi, M., Furumoto, T., Tanabe, Y,. Yamada, S., Osaki, M., Hashimoto, Y., Koyano, T., Hosokawa, A., Journal of Advanced Mechanical Design, Systems, and Manufacturing,  Vol. 15,  No. 3,  pp. 1-13,  (2021)

Internal face finishing for a cooling channel using a fluid containing free abrasive grains, Yamaguchi, M., Furumoto, T., Inagaki, S., Tsuji, M., Ochiai, Y., Hashimoto, Y., Koyano, T., Hosokawa, A., The International Journal of Advanced Manufacturing Technology, Vol. 114, pp.497-507, (2021).

CO2 laser cleavage of chemically strengthened glass, Furumoto, T., Hashimoto, Y., Ogi, H., Kawabe, T., Yamaguchi, M., Koyano, T., Hosokawa, A., Journal of Materials Processing Technology, Vol. 289, 9 pages, (2021)

Electrochemical milling using a parallel mechanism for high-speed translation of tool electrodes, Koyano, T., Honda, T., Hosokawa, A., Furumoto, T., International Journal of Electrical Machining, Vol.26, pp.25-32, (2021)

Experimental investigation into the spatter particle behavior of maraging steel during selective laser melting, Furumoto, T., Egashira, K., Oishi, K., Abe, S., Yamaguchi, M., Hashimoto, Y.,  Koyano, T., Hosokawa, A., Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol.15, No.4, JAMDSM0039, (2021)

Investigation of orthogonal turn-milling for higher machining efficiency and accuracy, Relationship between material removal rate and tool flank temperature, Shimanuki, K., Hosokawa, A., Koyano, T., Furumoto, T., Hashimoto, Y., Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol.15, No.4, JAMDSM0043, (2021)

Fundamental investigation of gyro barrel finishing, Experimental investigation of contact force between cylindrical workpiece and abrasive media under dry conditions, Hashimoto, Y., Ito, T., Nakayama, Y., Furumoto, T., Hosokawa, A., Precision Engineering, Vol. 67, pp.123-126, (2021)

2020

Studies on high-efficiency and high-precision orthogonal turn-milling, The effects of relative cutting speed and tool axis offset on tool flank temperature, Shimanuki, K., Hosokawa, A., Koyano, T., Furumoto, T., Hashimoto, Y., Precision Engineering, Vol. 66, pp. 180-187, (2020)

Milling characteristics of VN/AlCrN-multilayer PVD coated tools with lubricity and heat resistance, Hosokawa, A., Saito, R., Ueda, T., CIRP Annals Manufacturing Technology, Vol. 69, pp. 49-52, (2020)

2019

One-process surface texturing of a large area by electrochemical machining with short voltage pulses, Koyano, T., Hosokawa, A., Takahashi, T., Ueda, T., CIRP Annals, Vol. 68, No. 1, pp. 181-184, (2019)

Formation mechanism of pores inside structure fabricated by metal-based additive manufacturing, Egashira, K., Furumoto, T., Hishida, K., Abe, S., Koyano, T., Hashimoto, Y., Hosokawa, A., International Journal of Automation Technology, Vol. 13, No. 3, pp. 330-337, (2019)

Micro-electrical discharge machining of micro-rods using tool electrodes with high electrical resistivity, Koyano, T., Sugata, Y., Hosokawa, A., Furumoto, T., Precision Engineering, Vol. 55, pp. 95-100, (2019)

Microstructure of built part obtained by powder bed fusion process with metal, Furumoto, T., Egashira, K., Matsuura, S., Nikawa, M., Okada, M., Koyano, T., Hashimoto, Y., Hosokawa, A., Key Engineering Materials, Vol. 825, pp. 1-6, (2019)

Studies on eco-friendly grinding with extremely small amount of coolant, Applicability of contact type flexible blush nozzle, Hosokawa, A., Shimizu, R., Kiwata, T., Koyano, T., Furumoto, T., Hashimoto, Y., International Journal of Automation Technology, Vol. 13, No. 5 pp. 648-656, (2019)

Estimation of material removal rate distribution considering workpiece attitude in double-sided polishing, Hashimoto, Y., Sano, T., Furumoto, T., Hosokawa, A., Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 13, No. 1, 12 pages, (2019)

Development an identification method of friction coefficient between wafer and carrier in double-sided lapping, Hashimoto, Y., Sano, T., Furumoto, T., Hosokawa, A., Precision Engineering, Vol. 56, pp. 364-369, (2019)

2018

両面研磨シミュレーションに基づくウェハ挙動の検討　橋本洋平．佐野智哉，古本達明，細川晃　精密工学会誌　84巻　2号　188-193頁　2018

Experimental investigation of melt pool behaviour during selective laser melting by high speed imaging　T., Furumoto, et al.　CIRP Annals – Manufacturing Technology, (2018)

Design and development of a low-cost 3D metal printer, Nor Ana Rosli, Mohd Rizal Alkahari, Faiz Redza Ramli, Shajahan Maidin, Mohd Nizam Sudin, S.,Subramoniam, T., Furumoto, Journal of Mechanical Engineering Research and Developments，Vol. 41, No. 3,pp. pp. 47-54, (2018)

Analysis of Electrochemical Machining Process with Ultrashort Pulses Considering Stray Inductance of Pulse Power Supply, T., Koyano, A., Hosokawa, T., Furumoto. Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol, 12,  No. 5, pp. 18-00169, (2018)

Turning of Difficult-to-Machine Materials with an Actively Driven Rotary Tool (ADRT) —Proposition of reciprocating turning contingent on fundamental cutting characteristics—　A., Hosokawa, H., Yoshimatsu, T.,Koyano, T., Furumoto, et al, Journal of Advanced Mechanical Design, Systems, and Manufacturing Vol. 12, No. 5, pp. 18-00175, (2018）

Evaluation of separating process for different materials by thermal stress cleaving technique, Alias Mohd Saman, T., Furumoto, International Journal of Engineering and Technology, Vol. 7, No. 4, pp. 158-161,(2018)

Micro-Electrical Discharge Machining of Micro-Rods Using Tool Electrodes with High Electrica Resistivity, T., Koyano, Y., Sugata, A., Hosokawa, T., Furumoto, Precision Engineering, Vol.55, pp. 95-100, (2018)

2017

2016

2015

• A. M. Saman, T. Furumoto, A. Hosokawa, and T. Ueda: A Study on Separating of a Silicon Wafer with Moving Laser Beam by Using Thermal Stress Cleaving, Journal of Materials Processing Technology, (Accepted) (2015)
• 辺見慎吾，古本達明，細川晃，小谷野智広，上田隆司:CO2レーザ照射時の歯質除去機構，砥粒加工学会誌，59, 3, pp. 145-147 (2015)
• T. Furumoto, A. Koizumi, M. R. Alkahari, R. Anayama, A. Hosokawa, R. Tanaka and T. Ueda: Study on Permeability Characteristics of Porous Structure Fabricated by Additive Manufacturing, Journal of Materials Processing Technology, 219, pp. 10-16 (2015)
• A. M. Saman, T. Furumoto, A. Hosokawa, and T. Ueda: Thermal Stress Cleaving of Si-Wafer, Investigation of Fracture Initiation during Laser Beam Irradiation, Advanced Materials Research, 1101, pp. 412-418 (2015)

2014

• A. Hosokawa, T. Ueda, N. Hirose, T. Furumoto: High- quality machining of CFRP with high helix end mill, CIRP Annals, Manufacturing Technology, Vol. 63, No. 1, pp. 89-92, (2014.7)
• 渡邊英人，岡田将人，吉田昭宏，古本達明，浅川直紀:ダイヤモンドコートエンドミルによる超硬合金の切削加工，微小送りにおける切削機構の基礎的検討，精密工学会誌, Vol. 80, No. 6, pp. 615-616, (2014.6)
• 古本達明，鷲塚大祐，細川晃，上田隆司:軸付砥石によるセラミックス基複合材料の研削加工，ビトリファイドボンド砥石による高能率加工の実現，砥粒加工学会誌, Vol. 58, No. 6, pp. 380-385, (2014.6)
• M. R. Alkahari, T. Furumoto, T. Ueda, A. Hosokawa:Melt Pool and Single Track Formation in Selective Laser Sintering/ Selective Laser Melting, Advanced Materials Research, Vol. 933, pp. 196- 201, (2014.5)
• M. R. Alkahari, T. Furumoto, T. Ueda, A. Hosokawa:Consolidation Characteristics of SCM Based Metal Powder, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 8, No. 1, pp. 1-16, (2014.4)

2013

• 上田隆司，松永隆秀，古本達明，細川晃，長友正平:溝加工が施されたサファイアウエハのレーザ割断，日本機械学会論文集(C編)，Vol. 79, No. 805, pp. 3285-3289, (2013.9)
• T. Furumoto, T. Ueda, M. R. Alkahari, A. Hosokawa:Investigation of Laser Consolidation Process for Metal Powder by Two-Color Pyrometer and High Speed Video Camera, CIRP Annals, Manufacturing Technology, Vol. 62, No. 1, pp. 223-226, (2013.7)
• T. Koyano, M. Kunieda:Micro electrochemical machining using electrostatic induction feeding method, CIRP Annals, Vol. 62, No. 1, pp. 175-178, (2013.7)
• R. Tanaka, A. Hosokawa, T. Furumoto, T. Ueda:Wear Characteristics of Ceramic Tools When Turning BN Free-machining Steel, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 7, No. 3, pp. 474-484, (2013.5)
• R. Tanaka, A. Hosokawa, T. Furumoto, T. Ueda:Effects of Tool Edge Geometry on Cutting Temperature in Continuous Cutting of Case Hardened Steel, International Journal of Automation Technology, Vol. 7, No. 3, pp. 313-320, (2013.5)
• M. S. A. Aziz, T. Furumoto, T. Ueda, S. Takago, K. Kuriyama, S. Abe, A. Hosokawa:Reduction of Residual Stress inside the Consolidated Structure Obtained by Layered Manufacturing Process, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 7, No. 2, pp. 244-256, (2013.4)
• R. Tanaka, S. Yamazaki, A. Hosokawa, T. Furumoto, T. Ueda, M. Okada:Analysis of Cutting Behavior during Tapping and Measurement of Tool Edge Temperature Measured by a Two-Color Pyrometer, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 7, No. 2, pp. 115-124, (2013.3)

2012

• 田中隆太郎，西本秀人，田中大輔，古本達明，細川晃，上田隆司:焼結鋼の旋削加工における工具刃先温度と仕上げ面粗さ，砥粒加工学会誌, Vol. 56, No. 12, pp. 819- 823, (2012.12)
• M. R. Alkahari, T. Furumoto, T. Ueda, A. Hosokawa, R. Tanaka, M. S. A. Aziz:Thermal Conductivity of Metal Powder and Consolidated Material fabricated via Selective Laser Melting, Key Engineering Materials, Vol. 523-524, pp. 244-249, (2012.11)
• T. Koyano, M. Kunieda:Electrochemical Micromachining Using Electrostatic Induction Feeding Method, Key Engineering Materials, Vol. 523-524, pp.305-309, (2012.11)
• R. Tanaka, A. Hosokawa, T. Furumoto, T. Ueda:Cutting Performance of Ceramic Tools in Turning of Mild Steel, Key Engineering Materials, Vol. 523-524, pp. 493-496, (2012.11)
• 田中隆太郎，岡田将人，中川智博，古本達明，細川晃，上田隆司:複合機械加工による高品位面性状を有する表面改質層の生成，日本機械学会論文集(C編), Vol. 78, No. 794, pp. 3605-3614, (2012.10)
• 古本達明，楠大樹，網野亨，細川晃，田中隆太郎，上田隆司:遊離砥粒を用いた金型内部冷却水管の仕上げ加工，表面突起付加による曲線水管の加工性改善，砥粒加工学会誌, Vol. 56, No. 10, pp. 697-702, (2012.10)
• T. Furumoto, T. Ueda, T. Amino, D. Kusunoki, A. Hosokawa, R. Tanaka:Finishing Performance of Cooling Channel with Face Protuberance inside the Molding Die, Journal of Materials Processing Technology, Vol. 212, No. 10, pp. 2154-2160, (2012.10)
• T. Ishikawa, T. Ueda, T. Furumoto, A. Hosokawa, R. Tanaka:Pre-Groove Development for Laser Cleaving of Brittle Materials by Using Micro-Lens, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 6, No. 6, pp. 841-848, (2012.8)
• H. Nishimoto, R. Tanaka, A. Hosokawa, T. Ueda, T. Furumoto:Development of Tool Edge Temperature Measurement Method in Wet Cutting, Application for CBN and Poly Crystalline Diamond Tools, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 6, No. 6, pp. 916-922, (2012.8)
• M. S. A. Aziz, T. Furumoto, T. Ueda, S. Abe, A. Hosokawa, R. Tanaka:Study on Thermal and Strain Behavior in Selective Laser Sintering Process, Key Engineering Materials, Vol. 516, pp. 203-206, (2012.6)
• T. Koyano, M. Kunieda:Micro EDM by Stray-Capacitance-Coupled Electric Feeding, Key Engineering Materials, vol. 516, pp.245-250, (2012.6)
• T. Koyano, M. Kunieda:Electrolysis Free Micro EDM in Water Using Electrostatic Induction Feeding Method, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 6, No. 6, pp. 800-807, (2012.6)
• 上田隆司，古本達明，藤江典久，細川晃，田中隆太郎:2波長レーザを用いた硬脆材料のレーザ割断に関する研究，炭酸ガスレーザおよびEr:YAGレーザを用いた厚肉ガラスの精密切断，日本機械学会論文集(C編), Vol. 78, No. 788, pp. 1295-1304, (2012.4)

国際会議

2018

• •  
  • Study on the effectiveness of Extreme Cold Mist MQL system on turning process of stainless steel AISI 316　A. S. Jamaludin, Hosokawa, A., Furumoto, T., Koyano, T., Hashimoto, Y., Materials Science and Engineering，Vol. 319,　pp. 012054, (2018.1)

Temperature Measurement of Wire Electrode in Wire EDM by Two-color Pyrometer, Koyano, T., Hosokawa, A., Furumoto, T., Hashimoto, Y., Procedia CIRP, Vol. 68, pp. 96-99, (2018. 4)

Study on laser cleavage of thick sapphire wafer with CO2 laser beam, Reduction of waviness in cleavage surface, Kawabe, T., Furumoto, T., et al., Proc. of ISFA2018, pp, S049,（2018.7）

Properties of structure with negative poisson’s ratio built by metal powder bed fusion additive manufacturing, Matsuura, S., Furumoto, T., et al., Proc. of ISFA2018, pp. S048, (2018.7)

Microstructure of built part obtained by powder bed fusion process with metal, Furumoto T., et al., Proc. of IC3MT2018, pp. 2367,( 2018.9)

Study on high quality thermal stress cleavage of thick sapphire wafer, Kawabe, T., Furumoto, T., et al., Proc. of IC3MT2018, pp. 2367, (2018.9)

High-quality machining of CFRP with dDLC-coated and diamond-coated end mills, Tanaka, S., Hosokawa, A. Hoshino, G., Koyano, T., Furumoto, T. Hashimoto Y., Proc. of IC3MT2018, pp. 235, (2018. 9)　

Turning of Difficult-to-machine Materials with High Pressure Coolant, Hosokawa, A., Nomura, Y., Koyano, T., Furumoto, T., Hashimoto, Y., Proc. of ICPE2018, pp. B-1-12, (2018.11)

Study on Removal Characteristics of Soft Tissue by Er:YAG Laser Irradiation, Okudomi, H., Furumoto, T., et al., Proc. of ICPE2018, pp. G-1-4, (2018.11)　

Micro Texturing by Electrochemical Machining with Short Voltage Pulses, Takahashi, T., Koyano, T., Hosokawa, A., Furumoto, T., Hashimoto, Y., Proc. of ICPE2018, pp. B-5-12, (2018.11)

Electrical Discharge Machining of Micro-rods Using High Electric Resistance Electrodes and Piezoelectric Positioning Stage, Hayashi, R., Koyano, T., Hosokawa, A., Furumoto, T., Hashimoto, Y., Proc. of ICPE2018,　pp. B-5-19, (2018.11)　

2014

• • • • • Y. Ochiai, T. Furumoto, D. Kusunoki, T. Ueda, A. Hosokawa, T. Koyano:Internal Face Finishing Performance of Cooling Channel with Face Protuberance within Molding Die, Proc. of ICPE2014, pp. 86-86, (2014.7)
        • K. Mishima, A. Hosokawa, T. Kiwata, T. Ueda, T. Furumoto, T. Koyano:Studies on Reduction of Grinding Fluid in Cylindrical Plunge Grinding, Proc. of ICPE2014, pp. 617-620, (2014.7)
        • A. Yoshida, M. Okada, T. Furumoto, H. Watanabe, N. Asakawa:Wear Behavior of Diamond-coated End Mill in Cutting of Cemented Carbide, Proc. of ICPE2014, pp. 625-626, (2014.7)
        • R. Ogura, T. Furumoto, T. Ueda, A. Hosokawa, T. Koyano:Study on Reduction of Deformation of Consolidated Structure by Layered Manufacturing System, Optimization of Laser Scanning Method, Proc. of ICPE2014, pp. 74-77, (2014.7)
        • S. Henmi, T. Furumoto, A. Hosokawa, T. Koyano, T. Ueda:The Temperature Measurement of Human Enamel Surface during CO2 Laser Beam Irradiation, Proc. of ICPE2014, pp. 275-278, (2014.7)

2013

• • • • • S. Tamaki, A. Hosokawa, T. Ueda, T. Furumoto:Thermal Dressing of Metal Bonded Diamond Wheel by Nd:YAG Laser, Optimization of Air-jet Irradiation Angle, Proc. of LEM21, pp. 75-78, (2013.11)
        • T. Hayashi, T. Furumoto, T. Ueda, A. Hosokawa:Formation of Re-solidified Layer on the Surface of Dental Hard Tissue by Er:YAG Laser Irradiation, Proc. of LEM21, pp. 63-66, (2013.11)
        • D. Kusunoki, T. Furumoto, T. Ueda, A. Hosokawa:Internal Finishing of Cooling Channel within Molding Die Obtained by Additive Manufacturing, Proc. of LEM21, pp. 59-62, (2013.11)
        • N. M. Abbas, M. Kunieda, T. koyano:Electrostatic Induction Feeding EDM by Controlling the Duration of High Frequency Discharge, Proc. of LEM21, pp. 343-346, (2013.11)
        • T. Furumoto, A. Koizumi, A. Hosokawa, T. Ueda:Development of Permeability Measurement System of Porous Structure Obtained by Additive Manufacturing, Proc. of ICMT2013, pp. 110-113, (2013.10)
        • M. R. Alkahari, T. Furumoto, T. Ueda, A. Hosokawa:Consolidation Characteristics of SCM Based Metal Powder, Proc. of ICMDT2013, pp. 112. (2013.6)
        • T. Koyano, M. Kunieda:Ultra-Short Pulse ECM using Electrostatic Induction Feeding Method, Procedia CIRP, Vol. 6, pp. 390-394, (2013.4)
        • S. Henmi, T. Furumoto, T. Ueda, A. Hosokawa, T. Yamauchi:Study on Measurement of Laser Induced Dynamic Stress in the Suspension, The Influences of Powder Materials on Induced Dynamic Stress, Procedia CIRP, Vol. 5, pp. 74-78, (2013.1)

2012

• • • • • M. S. A. Aziz, T. Ueda, T. Furumoto, S. Abe, A. Hosokawa, R. Tanaka:Study on Machinability of Laser Sintered Materials Fabricated by Layered Manufacturing System, Influence of Hardness on Cutting Temperature, Procedia CIRP, Vol. 4, pp. 79-83, (2012.10)
        • T. Furumoto, M. R. Alkahari, T. Ueda, M. S. A. Aziz, A. Hosokawa:Monitoring of Laser Consolidation Process of Metal Powder with High Speed Video Camera, Physics procedia, Vol. 39, pp. 760-766, (2012.10)
        • R. Tanaka, K. Shimanuki, A. Hosokawa, T. Furumoto, T. Ueda:Tool Edge Temperature in Tapping of Stainless Steel, Proc. of ICPMT2012, pp. 109-112, (2012.9)
        • Y. Yahagi, T. Koyano, M. Kunieda, X. D. Yang:Micro Drilling EDM with High Rotation Speed of Tool Electrode Using the Electrostatic Induction Feeding Method, Procedia CIRP, vol.1, pp.162-165, (2012.7)